Cách chơi game đánh bài online-cách hack game bài online

Cách chơi game đánh bài online-cách hack game bài online

TECHNICAL SPECIFICATION

bThread……………………………………………………….. 1/8″ NPT
M24x1,5
Working pressure ……………………………………….. 190 bar
Release pressure min………………………………….. 9 bar*
Release pressure max…………………………………. 100 bar*
Operating temperature range………………………… -20°C to +50°C
Mass…………………………………………………………. 0.085 kg
* Refer to paragraph APPROVAL

MATERIAL

– Brass
– Elastomer

APPROVAL

A2P Approuved in association with:
VR12C EG 1.3.34………………………. Release pressure min: 15 bar
EC Approuved in association with:
– VR12C & CB / 1116-CPD-019……… Release pressure min: 15 bar
– VS12F & KVP / 1116-CPD-021……. Release pressure min: 9 bar
– VSB33 / 1116-CPD-020………………. Release pressure min: 9 bar
– VFR300-S / 1116-CPD-024…………. Release pressure min: 9 bar
VdS Approuved in association with:
– VS12F & VS12F KVP / G303010….. Release pressure min: 9 bar
Release pressure nominal: 42bar
Release pressure max: 53 bar
– VSB33 / G303009………………………. Release pressure min: 9 bar
Release pressure nominal: 42 bar
Release pressure max: 53 bar
– VFR300-S / G308008…………………. Release pressure min: 9 bar
Release pressure nominal: 60 bar
Release pressure max:100bar

DESCRIPTION

The actuator consist of two parts :
– A PIST, actuation piston that is essential for perforating punctured
seal valves (type VS12/VR12/VSB33).
– A brass body which incorporates an O-ring seal that fits on the
valve actuator port.
INSTALLATION
Lubricate the O-ring of the CP16 and PIST.
Place the PIST.
The PIST must be carefully placed in the valve’s actuation port
without pressing down.
Screw the CP16 fully on the valve port without forcing
Tighten with a wrench without forcing

OPERATION

When pressure is applied, the piston:
– Opens the valve by puncturing the seal (type VS12/VR12/VSB33)
– The valve plunger is depressed, causing the valve to discharge
(VFR300-S type).